Showing 1–12 of 13 resultsSorted by latest
-
Horizontal Machining Center for Automotive Housing Parts HMC630–HMC800
If a box-type part needs drilling and tapping on four different faces, how many times does a vertical machining center need to unclamp and reposition it? Usually three or four, and each reclamp risks losing the reference datum. A horizontal machining center avoids that cycle entirely: the HMC630 and HMC800 carry a B-axis table with positioning accuracy up to 0.001°, so a housing part can rotate to each face without leaving the fixture.
-
Slant Bed CNC Lathe for Shaft Machining TCK5052–TCK50100
Does a 1060mm Z-axis travel provide value when your production mainly involves 500mm shafts? In most cases, it does not. This is why this series comes in three Z-axis lengths built around one shared drivetrain, ensuring the frame is neither oversized nor undersized for the job at hand.
-
Tapping Center for Batch Production of Small Parts – TMC600 / TMC700
Does a 5.5 kW spindle solve your bottleneck, or do the 1.6-second tool change and 48 m/min rapid feed matter more when most of your cycle is positioning and tool exchange? A Tapping Center built for electronics and automotive batch work cuts non-cutting time before it cuts metal.
-
High-Speed Vertical Machining Center for Precision Small Parts
The VMC650 and VMC850 are high-speed vertical machining centers designed for precision small-part production, featuring 36 m/min rapid traverse, 12,000 rpm spindle speed, and 8 μm positioning accuracy.
-
1800mm Travel Vertical Machining Center for Large Mold and Structural Part Milling – VMC1890
Many buyers assume a 1600mm X-travel VMC is enough for any large mold base. Yet when the workpiece hits 1.7 meters, that assumption forces a second setup, and the alignment mismatch between setups shows up as a step on the parting surface. The VMC1890 closes that gap with 1800mm of X-travel, 720mm Z-travel, and a BT50 spindle rated for heavy-duty cutting on single-setup jobs that the VMC1690 simply cannot reach.
-
CNC Tapping Center for Housing Parts – High-Speed Machining – TMC700
Small housing and bracket parts often stall production at the drilling and tapping stage, even when every other station keeps pace. The TMC700 CNC tapping center for housing parts cuts that bottleneck with a 12,000rpm direct-drive spindle, 48m/min rapid feed, and a 1.6-second tool change across 21 tool positions. Built on Fanuc control and Taiwan-sourced linear guideways, it keeps hole patterns and tapped bosses consistent through long batch runs.
-
TMC600 Tapping Machining Center – 12000rpm Direct Drive, 48m/min Rapid Feed for 3C & Medical Parts
High-speed tapping. Micro-precision. 1.6s tool changes. The TMC600 Tapping Machining Center delivers 12000rpm direct-drive performance and 48m/min rapid traverse for small, complex parts. Built for 3C electronics, medical devices, and precision automotive components where cycle time and tight tolerances drive profitability.
-
TCK5052 Slant Bed CNC Lathe – Φ570mm Swing, 4200rpm High-Speed Turning for Shafts & Flanges
High-speed turning. Tight tolerances. 4200rpm efficiency. TCK5052 Slant Bed CNC Lathe — Φ570mm swing, 8" hydraulic chuck, Fanuc 0i-TF control & 12-station turret. Engineered for precision shafts, flanges, and valve bodies with stable batch production, superior chip evacuation, and optimized dynamic balance at high RPM.
-
TCK4550 Slant Bed CNC Lathe – Φ500mm Swing, 12-Station Turret for Shafts & Auto Parts
Precision turning. Fast cycles. ±0.005mm repeatability. TCK4550 Slant Bed CNC Lathe — Φ500mm swing, 580mm length, Fanuc 0i-TF control & 12-station hydraulic turret. Built for shafts, flanges, and automotive components with stable high-volume production.
-
HMC630 Horizontal Machining Center – 630mm Pallet, 24-Tool ATC for Box Parts & Automotive Components
Box parts. Multi-face machining. ±0.005mm precision. HMC630 Horizontal Machining Center — 630mm pallet, 1200kg load, BT50 spindle & 24-tool ATC. Engineered for complex housings, automotive components, and high-volume batch production with stable heavy-duty cutting.
-
Compact CNC Milling Machine for Small Batch Precision Parts – VMC855
A compact CNC milling machine with 800 by 550 millimeter travel and 500 kilogram table load does not leave much room for oversized fixtures. The VMC855 keeps the footprint tight while maintaining 0.008 millimeter positioning accuracy through HT-300 cast construction and a Taiwan direct-drive 12000 rpm spindle (8000/10000 rpm belt-driven optional). Small batch shops running mixed medical, electronics, and automotive parts get flexible production capacity without the floorspace penalty of larger machines.
-
VMC1265 Vertical Machining Center | BT40 High Precision CNC Milling Machine
The VMC1265 vertical machining center is a high-rigidity CNC milling machine designed for medium-to-large precision metal machining. It features a 1200×600 worktable, BT40 spindle system, and a stable linear guide structure for efficient industrial production. This model is widely used in mechanical parts manufacturing, mold processing, and structural component machining.
