Showing all 12 resultsSorted by latest
-
Extra Large Gantry Machining Center for Heavy Duty Cutting GMC3025–GMC6025
An Extra Large Gantry Machining Center with a 6000mm X-axis stroke places far greater demands on ballscrew stiffness than shorter-travel models. As travel increases, maintaining positioning stability requires larger ballscrews and additional guide support rather than simply extending the same structure.
-
Heavy Duty Gantry Machining Center for Large Aerospace and Mold Parts (GMC2520–GMC4020)
Long aluminum or titanium airframe sections warp under cutting loads. Thin webs and long spars flex as the tool removes material. A panel measured within tolerance right off the mill can drift out of spec as it cools. This heavy duty gantry machining center uses a 2000mm column span and a box-way Z-axis to hold geometry steady through the entire roughing-to-finishing sequence, eliminating the need for secondary operations and reducing the risk of scrap on high-value airframe parts.
-
CNC Gantry Milling Machine for Heavy Mold Machining – GMC1614 to GMC3014
A fixed-gantry CNC gantry milling machine with 1600–3000mm X-travel uses a dual-column frame to support wide-table milling without cantilever deflection. A common assumption is that any gantry frame automatically solves rigidity problems for large molds. In reality, consistent cutting quality requires the ballscrew diameter, guideway block count, and worktable load rating to match the actual workpiece length and weight. Designed by a team of 15 engineers in a CE-certified plant, the GMC series ships to mold manufacturers across 50 countries.
-
Heavy Duty Vertical Machining Center for Mold Manufacturing VMC1370–VMC1580
Deep cavity roughing in P20 mold steel often forces shops to slow feed rates when the machine lacks mass. The VMC1580 in this Heavy Duty Vertical Machining Center series weighs 10.5 tons and runs a BT50 spindle with 55 mm roller guideways. This mass sustains full-load cuts without the chatter that ruins surface finish on lighter machines. Since 2005, our 28,000-square-meter facility in Tengzhou, China, has operated under strict CE-certified manufacturing processes to ensure consistent build quality.
-
Heavy-Duty 2500mm Gantry Machining Center for Mold Bases & Structural Parts (GMC2518)
<p class="seo-hook-intro"> Upgrading from a 2000mm machine often means dealing with workpiece overhang, while moving to a 3000mm class requires massive floor space and expensive foundations. The <strong>2500mm travel gantry machining center</strong> (GMC2518) bridges this gap. Featuring a 5.5-ton table load and a 2700mm worktable, it provides the exact capacity needed for medium-to-large mold bases without the overhead of larger machines. This page details its rigid fixed-gantry structure, 8-block X-axis guideway layout, and why it is the practical, cost-effective choice for standard mold manufacturing. </p>
-
BT40 Vertical Machining Center for Large Mold Bases and Structural Parts – VMC1370
A 1300mm X-travel BT40 vertical machining center handles mold bases that force smaller machines into multiple setups. The fixed-column layout keeps the spindle supported across the full table length, so repeatability holds at 0.005mm even when the workpiece approaches the travel limit.
-
GMC4022 Gantry Machining Center – 4000mm X-Travel, 12 Ton Load for Extra Large Molds & Structural Parts
Extra-large parts. 12-ton capacity. ±0.005mm repeatability. GMC4022 Gantry Machining Center — 4000mm X-travel, 12-ton load, BT50 spindle & 24-tool ATC. Built for extra-large molds, automotive & aerospace structural parts with rigid stability and CE-certified precision.
-
Heavy Duty Vertical Machining Center for Large Mold and Structural Parts – VMC1160
When smaller machines start to chatter under heavy loads, it’s time to step up to a true heavy duty vertical machining center. The VMC1160 is built around a 6800 kg HT-300 cast structure with 45mm roller guides across all three axes. Paired with an 11 kW direct-drive spindle and full Mitsubishi drive systems, it’s engineered to handle demanding mold bases and structural steel parts without breaking a sweat.
-
GMC1612 Gantry Machining Center – 2 Ton Capacity, ±0.005mm Repeatability for Precision Mold Manufacturing
Big parts. One setup. ±0.008mm precision. The GMC1612 double-column gantry machining center — built for large molds, automotive & aerospace components, with BT50 spindle, 24-tool ATC, and rigid stability for high-efficiency production.
-
GMC2014 Gantry Machining Center – High Rigidity CNC Mill for Large Molds & Auto Parts
Large molds. Heavy parts. ±0.005mm repeatability. GMC2014 double-column gantry machining center — 2000mm X-travel, 3.5-ton load, BT50 spindle & 24-tool ATC. Built for large molds, automotive & aerospace components with rigid stability and high-efficiency production.
-
GMC3018 3000mm Travel Gantry Machining Center for Extra-Large Structural Parts & Molds
<p class="seo-hook-intro"> Machining structural beams or mold bases over 2400mm on a smaller machine forces operators to flip the part, introducing cumulative tolerance errors and adding non-cutting time. The <strong>3000mm travel gantry machining center</strong> (GMC3018) is engineered to avoid this bottleneck. With a 3200mm worktable, 6.5-ton capacity, and an upgraded 10-block X-axis guideway system to resist lever-effect sagging, it allows extra-large workpieces to be machined without repositioning. This page details its dynamic rigidity, heavy-duty cutting performance, and why it is the optimal solution for long-part manufacturing. </p>
-
Large Mold Gantry Machining Center for Heavy Duty Mold Base Machining – GMC3520
What happens when a large mold base exceeds the working range of a standard machining center? The machining process often requires multiple setups, making alignment control more difficult between operations. The GMC3520 provides a large mold machining center platform with extended travel, rigid gantry construction, and an 8-ton worktable capacity for mold base milling and large structural component machining.
