Showing 1–12 of 27 resultsSorted by latest
-
5-Axis Machining Center for Aerospace & Medical Parts FMC170–FMC650
A 5-Axis Machining Center running at 20,000 rpm on a Φ200mm table solves a different problem than one handling a 300kg workpiece on a Φ650mm trunnion. This is why the FMC170, FMC320, and FMC650 share a platform but rarely compete for the same job.
-
Heavy Duty Slant Bed CNC Lathe for Large Diameter Parts TCK4550–TCK4563
A heavy duty slant bed CNC lathe is designed for large-diameter cylinder barrels and heavy shafts where standard machines may struggle with rigidity, vibration control, and cutting stability. The TCK4550 through TCK4563 feature a standard 10-inch hydraulic chuck and Φ87mm spindle bore. This allows bar stock up to Φ72mm to feed straight through the headstock, while the 11/15 kW spindle motor provides the power required for interrupted cuts on forged or thick-wall stock.
-
Slant Bed CNC Lathe for Shaft Machining TCK5052–TCK50100
Does a 1060mm Z-axis travel provide value when your production mainly involves 500mm shafts? In most cases, it does not. This is why this series comes in three Z-axis lengths built around one shared drivetrain, ensuring the frame is neither oversized nor undersized for the job at hand.
-
Bridge Type CNC Machining Center for Heavy Parts GMC3022–GMC5022
A bridge type CNC machining center with a 5000mm table does not automatically justify its price premium over a 3000mm model — buyers often assume larger travel means higher cutting power, yet the GMC3022, GMC4022, and GMC5022 all share the same 22kW BT50 spindle. The real difference is reach and load capacity, not material removal rate, so the purchase decision should track workpiece dimensions rather than expected horsepower.
-
Large Gantry Machining Center for Structural Parts GMC2018–GMC3518
This large gantry machining center handles 7.5-ton worktable loads and 3500mm X-axis travel, managing structural parts that overload standard moving-column layouts. The heavy-duty gantry milling machine pairs a BT50 belt-drive spindle with a fixed dual-column frame. This keeps the spindle head rigid across the full 1900mm Y-axis span.
-
CNC Gantry Milling Machine for Heavy Mold Machining – GMC1614 to GMC3014
A fixed-gantry CNC gantry milling machine with 1600–3000mm X-travel uses a dual-column frame to support wide-table milling without cantilever deflection. A common assumption is that any gantry frame automatically solves rigidity problems for large molds. In reality, consistent cutting quality requires the ballscrew diameter, guideway block count, and worktable load rating to match the actual workpiece length and weight. Designed by a team of 15 engineers in a CE-certified plant, the GMC series ships to mold manufacturers across 50 countries.
-
Large Vertical Machining Center for Large Parts | VMC1690–VMC1890
An 1800×900mm worktable solves the main challenge of large-part machining on a large vertical machining center. Parts that previously required two setups on a standard machine now finish in a single clamping on a vertical machining center for large parts, like the VMC1690 or VMC1890. This cuts repositioning errors and reduces floor-to-floor time. With an 1800kg table capacity and a BT50 spindle rated for 15/18.5kW, the D series machines structural plates, mold bases, and energy housings that smaller machines cannot handle. Built in a 28,000-square-meter facility with ISO9001:2008 and CE certification, the D series ships to energy and structural-part manufacturers in over 50 countries.
-
Heavy Duty Vertical Machining Center for Mold Manufacturing VMC1370–VMC1580
Deep cavity roughing in P20 mold steel often forces shops to slow feed rates when the machine lacks mass. The VMC1580 in this Heavy Duty Vertical Machining Center series weighs 10.5 tons and runs a BT50 spindle with 55 mm roller guideways. This mass sustains full-load cuts without the chatter that ruins surface finish on lighter machines. Since 2005, our 28,000-square-meter facility in Tengzhou, China, has operated under strict CE-certified manufacturing processes to ensure consistent build quality.
-
Vertical Machining Center for General Manufacturing VMC855–VMC1160
Bigger worktable, better value? Not always. The VMC855 and VMC1160 share the same BT40 spindle and 0.005 mm repeat accuracy — the real question is whether your parts actually need the extra 300 mm of X-axis travel and 6.8 tons of extra mass.
-
Heavy-Duty 2500mm Gantry Machining Center for Mold Bases & Structural Parts (GMC2518)
<p class="seo-hook-intro"> Upgrading from a 2000mm machine often means dealing with workpiece overhang, while moving to a 3000mm class requires massive floor space and expensive foundations. The <strong>2500mm travel gantry machining center</strong> (GMC2518) bridges this gap. Featuring a 5.5-ton table load and a 2700mm worktable, it provides the exact capacity needed for medium-to-large mold bases without the overhead of larger machines. This page details its rigid fixed-gantry structure, 8-block X-axis guideway layout, and why it is the practical, cost-effective choice for standard mold manufacturing. </p>
-
1800mm Travel Vertical Machining Center for Large Mold and Structural Part Milling – VMC1890
Many buyers assume a 1600mm X-travel VMC is enough for any large mold base. Yet when the workpiece hits 1.7 meters, that assumption forces a second setup, and the alignment mismatch between setups shows up as a step on the parting surface. The VMC1890 closes that gap with 1800mm of X-travel, 720mm Z-travel, and a BT50 spindle rated for heavy-duty cutting on single-setup jobs that the VMC1690 simply cannot reach.
-
BT40 Vertical Machining Center for Large Mold Bases and Structural Parts – VMC1370
A 1300mm X-travel BT40 vertical machining center handles mold bases that force smaller machines into multiple setups. The fixed-column layout keeps the spindle supported across the full table length, so repeatability holds at 0.005mm even when the workpiece approaches the travel limit.
