Showing all 10 resultsSorted by latest
-
Gantry Machining Center for Mold Making & Structural Parts – GMC1612–GMC2512
A gantry machining center with 1600 × 1000 mm table travel and a 15 kW BT50 belt-drive spindle handles mold-base roughing at lower cost than large bridge mills, though the fixed-column layout only delivers its full rigidity once workpiece width exceeds the point where a moving-column VMC starts to cantilever.
-
Tapping Center for Batch Production of Small Parts – TMC600 / TMC700
Does a 5.5 kW spindle solve your bottleneck, or do the 1.6-second tool change and 48 m/min rapid feed matter more when most of your cycle is positioning and tool exchange? A Tapping Center built for electronics and automotive batch work cuts non-cutting time before it cuts metal.
-
Large Vertical Machining Center for Large Parts | VMC1690–VMC1890
An 1800×900mm worktable solves the main challenge of large-part machining on a large vertical machining center. Parts that previously required two setups on a standard machine now finish in a single clamping on a vertical machining center for large parts, like the VMC1690 or VMC1890. This cuts repositioning errors and reduces floor-to-floor time. With an 1800kg table capacity and a BT50 spindle rated for 15/18.5kW, the D series machines structural plates, mold bases, and energy housings that smaller machines cannot handle. Built in a 28,000-square-meter facility with ISO9001:2008 and CE certification, the D series ships to energy and structural-part manufacturers in over 50 countries.
-
Vertical Machining Center for General Manufacturing VMC855–VMC1160
Bigger worktable, better value? Not always. The VMC855 and VMC1160 share the same BT40 spindle and 0.005 mm repeat accuracy — the real question is whether your parts actually need the extra 300 mm of X-axis travel and 6.8 tons of extra mass.
-
High-Speed Vertical Machining Center for Precision Small Parts
The VMC650 and VMC850 are high-speed vertical machining centers designed for precision small-part production, featuring 36 m/min rapid traverse, 12,000 rpm spindle speed, and 8 μm positioning accuracy.
-
High-Speed Vertical Machining Center for Aluminum Parts & Small Batch Production VMC650
Which spindle speed keeps chatter out of thin-wall aluminum housings without pushing tool wear past what a small batch run can absorb? A 12000rpm direct-drive BT40 spindle on a compact three-axis frame answers that question for engine brackets, motorcycle housings, and NEV motor covers alike. This machine trades large-envelope capacity for spindle speed and tool-change speed matched to aluminum and cast-iron batch work.
-
BT40 Vertical Machining Center for Large Mold Bases and Structural Parts – VMC1370
A 1300mm X-travel BT40 vertical machining center handles mold bases that force smaller machines into multiple setups. The fixed-column layout keeps the spindle supported across the full table length, so repeatability holds at 0.005mm even when the workpiece approaches the travel limit.
-
CNC Tapping Center for Housing Parts – High-Speed Machining – TMC700
Small housing and bracket parts often stall production at the drilling and tapping stage, even when every other station keeps pace. The TMC700 CNC tapping center for housing parts cuts that bottleneck with a 12,000rpm direct-drive spindle, 48m/min rapid feed, and a 1.6-second tool change across 21 tool positions. Built on Fanuc control and Taiwan-sourced linear guideways, it keeps hole patterns and tapped bosses consistent through long batch runs.
-
Compact CNC Milling Machine for Small Batch Precision Parts – VMC855
A compact CNC milling machine with 800 by 550 millimeter travel and 500 kilogram table load does not leave much room for oversized fixtures. The VMC855 keeps the footprint tight while maintaining 0.008 millimeter positioning accuracy through HT-300 cast construction and a Taiwan direct-drive 12000 rpm spindle (8000/10000 rpm belt-driven optional). Small batch shops running mixed medical, electronics, and automotive parts get flexible production capacity without the floorspace penalty of larger machines.
-
CK6163 CNC Lathe for Precision Metal Turning
Turn precision parts faster. Φ630mm swing, 1600rpm, ±0.005mm repeatability. CK6163 flat-bed CNC lathe — ideal for shafts, flanges, and high-volume metal turning with stable performance and easy automation.
