Professional CNC Machine Products
We provide advanced CNC machining solutions including vertical machining centers, horizontal machining centers, gantry machining centers, CNC lathes, and 5-axis machining centers for global industrial manufacturing.
Showing 13–24 of 37 resultsSorted by latest
-
Tapping Center for Batch Production of Small Parts – TMC600 / TMC700
Does a 5.5 kW spindle solve your bottleneck, or do the 1.6-second tool change and 48 m/min rapid feed matter more when most of your cycle is positioning and tool exchange? A Tapping Center built for electronics and automotive batch work cuts non-cutting time before it cuts metal.
-
Large Vertical Machining Center for Large Parts | VMC1690–VMC1890
An 1800×900mm worktable solves the main challenge of large-part machining on a large vertical machining center. Parts that previously required two setups on a standard machine now finish in a single clamping on a vertical machining center for large parts, like the VMC1690 or VMC1890. This cuts repositioning errors and reduces floor-to-floor time. With an 1800kg table capacity and a BT50 spindle rated for 15/18.5kW, the D series machines structural plates, mold bases, and energy housings that smaller machines cannot handle. Built in a 28,000-square-meter facility with ISO9001:2008 and CE certification, the D series ships to energy and structural-part manufacturers in over 50 countries.
-
Heavy Duty Vertical Machining Center for Mold Manufacturing VMC1370–VMC1580
Deep cavity roughing in P20 mold steel often forces shops to slow feed rates when the machine lacks mass. The VMC1580 in this Heavy Duty Vertical Machining Center series weighs 10.5 tons and runs a BT50 spindle with 55 mm roller guideways. This mass sustains full-load cuts without the chatter that ruins surface finish on lighter machines. Since 2005, our 28,000-square-meter facility in Tengzhou, China, has operated under strict CE-certified manufacturing processes to ensure consistent build quality.
-
Vertical Machining Center for General Manufacturing VMC855–VMC1160
Bigger worktable, better value? Not always. The VMC855 and VMC1160 share the same BT40 spindle and 0.005 mm repeat accuracy — the real question is whether your parts actually need the extra 300 mm of X-axis travel and 6.8 tons of extra mass.
-
High-Speed Vertical Machining Center for Precision Small Parts
The VMC650 and VMC850 are high-speed vertical machining centers designed for precision small-part production, featuring 36 m/min rapid traverse, 12,000 rpm spindle speed, and 8 μm positioning accuracy.
-
Heavy-Duty 2500mm Gantry Machining Center for Mold Bases & Structural Parts (GMC2518)
<p class="seo-hook-intro"> Upgrading from a 2000mm machine often means dealing with workpiece overhang, while moving to a 3000mm class requires massive floor space and expensive foundations. The <strong>2500mm travel gantry machining center</strong> (GMC2518) bridges this gap. Featuring a 5.5-ton table load and a 2700mm worktable, it provides the exact capacity needed for medium-to-large mold bases without the overhead of larger machines. This page details its rigid fixed-gantry structure, 8-block X-axis guideway layout, and why it is the practical, cost-effective choice for standard mold manufacturing. </p>
-
High-Speed Vertical Machining Center for Aluminum Parts & Small Batch Production VMC650
Which spindle speed keeps chatter out of thin-wall aluminum housings without pushing tool wear past what a small batch run can absorb? A 12000rpm direct-drive BT40 spindle on a compact three-axis frame answers that question for engine brackets, motorcycle housings, and NEV motor covers alike. This machine trades large-envelope capacity for spindle speed and tool-change speed matched to aluminum and cast-iron batch work.
-
1800mm Travel Vertical Machining Center for Large Mold and Structural Part Milling – VMC1890
Many buyers assume a 1600mm X-travel VMC is enough for any large mold base. Yet when the workpiece hits 1.7 meters, that assumption forces a second setup, and the alignment mismatch between setups shows up as a step on the parting surface. The VMC1890 closes that gap with 1800mm of X-travel, 720mm Z-travel, and a BT50 spindle rated for heavy-duty cutting on single-setup jobs that the VMC1690 simply cannot reach.
-
BT40 Vertical Machining Center for Large Mold Bases and Structural Parts – VMC1370
A 1300mm X-travel BT40 vertical machining center handles mold bases that force smaller machines into multiple setups. The fixed-column layout keeps the spindle supported across the full table length, so repeatability holds at 0.005mm even when the workpiece approaches the travel limit.
-
CNC Tapping Center for Housing Parts – High-Speed Machining – TMC700
Small housing and bracket parts often stall production at the drilling and tapping stage, even when every other station keeps pace. The TMC700 CNC tapping center for housing parts cuts that bottleneck with a 12,000rpm direct-drive spindle, 48m/min rapid feed, and a 1.6-second tool change across 21 tool positions. Built on Fanuc control and Taiwan-sourced linear guideways, it keeps hole patterns and tapped bosses consistent through long batch runs.
-
FMC Series 5-Axis Machining Center (FMC170/320/650)
Stop flipping parts. The FMC series (FMC170/320/650) allows you to finish complex 3D contours and undercuts in a single setup. Engineered with Taiwan direct-driven rotary tables for zero-backlash precision and standard Siemens 840D SL controllers for seamless multi-axis interpolation, these machines eliminate secondary operations and cumulative errors. Whether you need the 20,000 rpm FMC170 for high-speed fine finishing or the heavy-duty FMC650 with 45mm roller guideways for aggressive structural cutting, we have the exact configuration for your shop. Send us your part drawing today for a free technical evaluation and cycle-time analysis.
-
TMC600 Tapping Machining Center – 12000rpm Direct Drive, 48m/min Rapid Feed for 3C & Medical Parts
High-speed tapping. Micro-precision. 1.6s tool changes. The TMC600 Tapping Machining Center delivers 12000rpm direct-drive performance and 48m/min rapid traverse for small, complex parts. Built for 3C electronics, medical devices, and precision automotive components where cycle time and tight tolerances drive profitability.
