Professional CNC Machine Products
We provide advanced CNC machining solutions including vertical machining centers, horizontal machining centers, gantry machining centers, CNC lathes, and 5-axis machining centers for global industrial manufacturing.
Showing 1–12 of 37 resultsSorted by latest
-
Horizontal Machining Center for Automotive Housing Parts HMC630–HMC800
If a box-type part needs drilling and tapping on four different faces, how many times does a vertical machining center need to unclamp and reposition it? Usually three or four, and each reclamp risks losing the reference datum. A horizontal machining center avoids that cycle entirely: the HMC630 and HMC800 carry a B-axis table with positioning accuracy up to 0.001°, so a housing part can rotate to each face without leaving the fixture.
-
5-Axis Machining Center for Aerospace & Medical Parts FMC170–FMC650
A 5-Axis Machining Center running at 20,000 rpm on a Φ200mm table solves a different problem than one handling a 300kg workpiece on a Φ650mm trunnion. This is why the FMC170, FMC320, and FMC650 share a platform but rarely compete for the same job.
-
Heavy Duty Slant Bed CNC Lathe for Large Diameter Parts TCK4550–TCK4563
A heavy duty slant bed CNC lathe is designed for large-diameter cylinder barrels and heavy shafts where standard machines may struggle with rigidity, vibration control, and cutting stability. The TCK4550 through TCK4563 feature a standard 10-inch hydraulic chuck and Φ87mm spindle bore. This allows bar stock up to Φ72mm to feed straight through the headstock, while the 11/15 kW spindle motor provides the power required for interrupted cuts on forged or thick-wall stock.
-
Flat Bed CNC Lathe for Large Shaft and Flange Turning CK6150–CK61100
A flat bed CNC lathe handles parts that a slant bed machine cannot safely rough out in one pass. Flat bed lathes are sometimes viewed as traditional alternatives to modern slant bed machines. However, their design advantages appear when heavy stock removal, large diameters, and low-speed torque are the priority. The CK6150 through CK61100 models use a box-way guide structure ranging from 400mm to 755mm and a gearbox-driven three-step spindle. This setup holds heavy stock steady at low RPM instead of chasing high-speed finishing cycles.
-
Slant Bed CNC Lathe for Shaft Machining TCK5052–TCK50100
Does a 1060mm Z-axis travel provide value when your production mainly involves 500mm shafts? In most cases, it does not. This is why this series comes in three Z-axis lengths built around one shared drivetrain, ensuring the frame is neither oversized nor undersized for the job at hand.
-
Ultra Large Double Column Machining Center for Heavy Parts GMC4032–GMC8032
A reactor support flange 2.5 meters across will twist a standard gantry's Y-axis during a wide pass and push hole positions out of tolerance. The GMC4032–GMC8032 lineup holds 3200mm column spacing and pairs the Y-axis with a Φ80mm ballscrew and 8 guide blocks, controlling the torsional flex that a wide table develops under heavy feed. This ultra large double column machining center targets oversized structural parts and energy sector castings that push past what a standard gantry mill can hold square.
-
Extra Large Gantry Machining Center for Heavy Duty Cutting GMC3025–GMC6025
An Extra Large Gantry Machining Center with a 6000mm X-axis stroke places far greater demands on ballscrew stiffness than shorter-travel models. As travel increases, maintaining positioning stability requires larger ballscrews and additional guide support rather than simply extending the same structure.
-
Bridge Type CNC Machining Center for Heavy Parts GMC3022–GMC5022
A bridge type CNC machining center with a 5000mm table does not automatically justify its price premium over a 3000mm model — buyers often assume larger travel means higher cutting power, yet the GMC3022, GMC4022, and GMC5022 all share the same 22kW BT50 spindle. The real difference is reach and load capacity, not material removal rate, so the purchase decision should track workpiece dimensions rather than expected horsepower.
-
Heavy Duty Gantry Machining Center for Large Aerospace and Mold Parts (GMC2520–GMC4020)
Long aluminum or titanium airframe sections warp under cutting loads. Thin webs and long spars flex as the tool removes material. A panel measured within tolerance right off the mill can drift out of spec as it cools. This heavy duty gantry machining center uses a 2000mm column span and a box-way Z-axis to hold geometry steady through the entire roughing-to-finishing sequence, eliminating the need for secondary operations and reducing the risk of scrap on high-value airframe parts.
-
Large Gantry Machining Center for Structural Parts GMC2018–GMC3518
This large gantry machining center handles 7.5-ton worktable loads and 3500mm X-axis travel, managing structural parts that overload standard moving-column layouts. The heavy-duty gantry milling machine pairs a BT50 belt-drive spindle with a fixed dual-column frame. This keeps the spindle head rigid across the full 1900mm Y-axis span.
-
CNC Gantry Milling Machine for Heavy Mold Machining – GMC1614 to GMC3014
A fixed-gantry CNC gantry milling machine with 1600–3000mm X-travel uses a dual-column frame to support wide-table milling without cantilever deflection. A common assumption is that any gantry frame automatically solves rigidity problems for large molds. In reality, consistent cutting quality requires the ballscrew diameter, guideway block count, and worktable load rating to match the actual workpiece length and weight. Designed by a team of 15 engineers in a CE-certified plant, the GMC series ships to mold manufacturers across 50 countries.
-
Gantry Machining Center for Mold Making & Structural Parts – GMC1612–GMC2512
A gantry machining center with 1600 × 1000 mm table travel and a 15 kW BT50 belt-drive spindle handles mold-base roughing at lower cost than large bridge mills, though the fixed-column layout only delivers its full rigidity once workpiece width exceeds the point where a moving-column VMC starts to cantilever.
